Home Up Jr instructions

Roll-tec Computer Roll-tec 15 Roll-tec mini Roll-tec Jr Roll-tec 9

Roll-tec Jr. flat bed cutter   $1099.00 plus die and S&H


 Cut Full sheet wallets and similar single sheets products.

 Roller bearing transport system for slide tray
 Oversize aircraft quality aluminum drive rollers
 All aluminum main body construction, no plastic parts
 Heavy duty drive bearings
 Quick and easy die change
 Dies can be made to order
 Baked enamel
 Hardened side guides
 Adjustable roller pressure screws 

Compact size 8" X 11" x 18"   handles paper size up to 8" X 11" maximum


Ergonomically designed for to reduce back strain, the crank drive handle is placed so the operator
can remain is a straight upright position while using the cutter.


Simple to use

  1. Slide tray to left or right to start
  2. Place photo on die in between paper guides
  3. Place the cutting plate on top of the die and photo
  4. Turn handle and gently feed the tray, and die into the cutter
  5. Continue turning until the plate and die exit the rollers, about 2 turns
  6. Remove cutting plate and remove your pictures carefully


Rotec makes die cutting quick and easy with a dependable cutter!


Hit Counter